Range Rover Velar Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Hello all trying to replace my engine air filter on my P300, Read the workshop manual and worked out you need a long T20 screwdriver to reach the 8 screws. However, still can't lift it up and get it past the black metal support structure behind the the light.

Hood Light Motor vehicle Automotive tire Automotive lighting


Any advice would be welcome.

Thanks
David
 

·
Registered
P250 2019
Joined
·
28 Posts
You need to unscrew the screws in the cover up so that they come out with their heads as far as possible above the cover and, in addition, disconnect the corrugated air duct from both the cover and the motor inlet. And then, at some position, you carefully remove it.
Sorry for the bad english - machine translation )
 
1 - 2 of 2 Posts
Top